www.rfm.com e-mail: info@rfm.com page 1 of 3 ?2009-2010 by rf monolithics, inc. XTL1003 - 2/3/10 electrical characteristics characteristic sym notes minimum typical maximum units nominal frequency 13.56000 mhz mode of oscillation fundamental operating temperature range -20 +70 c frequency stability over operating temperature range 20 ppm (referred to the value at 25 c) frequency make tolerance f l 10 ppm @ 25 c 3 c equivalent series resistance esr 40 ? nominal drive level 10 uw shunt capacitance c o 2.0 pf load capacitance c l 20 pf motional capacitance c m 4.2 ff 20% aging 1.0 ppm/year @25 c stanard shipping quantity on 330 mm (13?) reel 3000 units lid symbolization (in addition to lot and/or date codes) 1003 ywws
sm5032-4 case 13.56000 mhz crystal unit XTL1003 caution: electrostatic sensitive device. observe precautions for handling. notes: 1. the design, manufacturing process, and specifications of this device are subject to change without notice. ? surface mount seam-weld package good frequency stability over temperature excellent reliability complies with directive 2002/95/ec (rohs) the XTL1003 is a surface mount 5.0 x 3.2 mm crystal unit for use in wireless telecommunications devices, especially where an ultra-miniature package is needed for mobility.
www.rfm.com e-mail: info@rfm.com page 2 of 3 ?2009-2010 by rf monolithics, inc. XTL1003 - 2/3/10 1 . 2 0 . 1 2.2 0.1 1 . 2 0 . 1 1.7 0.1 dot indicates pin 1 electrical connections note: pin #1 & #3 are connected to metal cap on top pin connection 1gnd 2in/out 3gnd 4in/out 3 . 2 0 . 1 5.0 0.1 0 . 8 0 . 1 1 . 4 0 . 2 1.2 0.1 2.4 0.2 pin 2 pin 3 pin 4 pin 1 0 . 8 0 . 1 4-terminal surface-mount seam weld case 5.0 x 3.2 mm nominal footprint sm5032-4 case footprint (mm) package orientation in carrier tape package dimensions (mm) 1003 ywws 1003 ywws 1003 ywws top view side view bottom view
www.rfm.com e-mail: info@rfm.com page 3 of 3 ?2009-2010 by rf monolithics, inc. XTL1003 - 2/3/10 reel dimensions tape dimensions notes: 1. unless otherwise specified, tolerance on dimensions is 0.1 mm 2. material is black conductive polystyrene 3. 10 pitch cumulative tolerance is 0.2 mm
|
